ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit grips have three distinct areas: INNER - This area is the perfect step up for your hands to rest against for maximum bar control in turns. MIDDLE - This area is perfect for extra torque and powering while climbing. OUTER - This thickest area is for better hand comfort, especially while descending. Each area of the fit grip flows flawlessly into each other creating the perfect hand placement naturally. Your hands instantly feel comfort when they grasp their unique shape, as if they were exclusively molded for your hands.
The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single sided lock on grip - 29–30mm diameter
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
The grip choice of top athletes around the world, the Ruffian Lock-On Grip features exceptional control in a low profile grip designed specifically for racers. - Diamondized pattern for optimal traction - Ultra-thin profile - Lock-On Grip System = 100% Slip-Free performance - Includes new Snap Cap End Plugs
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile
Darren Berrecloth is a legendary freerider who has competed in nearly every major freeride event and has created some of the most memorable moments in mountain biking. We are thrilled to introduce the new Lizard Skins "Bearclaw" lock-on grips. These grips have been designed and created to Darren's specifications and are our thinnest lock-on grips. Not only do these grips feature a comfortable low profile, they also have an extremely comfortable pattern and compound for use with or without gloves. Length: 130 mm Weight (with plugs): 105 grams Diameter: 29.5 mm
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single compound grip with flange secures and protects the hand so athletes can focus on the road. Single Compound Grips include push-in plugs. - Length: 140mm - Weight (with plugs): 134 grams - Diameter: Medium (32mm)
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)
Durable, high-density foam makes Ritchey's WCS Ergo True Grips perfect for all your off-road riding. These lightweight grips feature Ritchey's classic ergo shape so your hands feel great mile after mile.
Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.
Dimension Hand-Stitched Leather Grips, solid color with contrast stitching. - Classic-style grips for cruisers or mountain bikes - Flange: No - Grip Shift Specific: No - Length: 127mm - Lock On: No - Shape: Round - Weight: 58g
The classic Longneck ribbed grip pattern just got 3 inches longer! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - Packaged in 100% recycled grip material and includes a free fixed gear sprocket keychain for less waste - Open ends with Thug Plug end plugs included
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting
Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
$11.95 - $28.95
The World's Best Freeride Mountain Biker and the World Leader in Grip Technology have teamed up to offer the Sensus Freeride grip. Designed by the reigning Red Bull Rampage winner, Cam Zink, for optimal feel and manufactured using ODI's proprietary grip compounds, the Sensus freeride grips provide a super soft feel without sacrificing control. - Ribber pattern for comfort and control - Constructed of our proprietary grip compound for comfort and durability - Includes Sensus Push-In Plugs
A new pair or Lizard Skins' 494 Grips is just the ticket to give your two-wheeled ride a fresh look and feel. Comfortable and easy to install, these single-compound grips let you easily hold on for great control.
Utah's Delicate Arch printed pattern pays homage to the state's mountain biking trails while providing excellent traction. Lock-On Grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 114 grams - Diameter: Small (30.5 mm)
$23.00 - $27.00
• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
ODI has put together a Limited Edition Stay Strong version of the popular Ruffian BMX Lock-On Grip. Before becoming a multi-time X Games Gold Medalist, Stephen had already won just about every racing title in the UK. The special packaging and laser etched clamps help support Stephen's Stay Strong Foundation which was created after the super-star dirt jumper was left paralyzed when he crashed during the Baltimore Dew Tour stop in 2007. By purchasing a pair of these grips you are helping to support Stephen and his family on his road to recovery and you are showing love to a fellow BMX racer. - Diamondized pattern for optimal traction - Inlcudes custom Stay Strong clamps - Lock-On Grip System = 100% Slip-Free performance - Comes with a Stay Strong sticker - Includes Snap Cap End Plugs
The attack mountain bike grips offer legendary performance preferred by top athletes for over two decades. - Classic mushroom style rib pattern - Durable grip compound - Excellent shock absoprtion from rib pattern - Thick rounded ends to protect against grip blowout
Ritchey's WCS TrueGrips are ultra-light grips that offer hand-saving comfort. They're made of tough neoprene foam that's plush and grippy — even when wet.
PDW's Cork Chop Grips pair classic, vintage style with grippy ergonomics. Pop the cork and relieve the pressure: It's a celebration. • 142 grams • 5-inches in length • Cork/rubber compound