Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
The XA Elite WTS offers high technology, simplicity, and fun in a strong, light, tubeless-ready wheel-tire system. - ISM4D machining makes the wheel lighter without compromising on strength - 25mm internal width rim with hookless profile - Tubeless tape on wheels: the lightest and simplest way to get the tubeless benefits such as better traction, comfort, and reduced risk of flats - Includes Quest Pro tire, 27.5 x 2.4" - Light and strong single-ply casing with Guard protection - X-mix dual compound: safe grip and rolling efficiency
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires, it will eat up the roughest of descents you can throw at it and it'll climb to those trailheads with ease. The perfect size for demanding all-mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
$434.00 - $605.00
Big tires and wide rims normally mean heavy wheels. But not with DT's BR 2250s! Nearly as light as standard wheels and with the footprint only fatties can offer, this wheelset turns any fat bike into a fun-machine!
With the T 1800 CLASSIC track style is taken to the streets. From the wide, medium profile alloy rim to the extra flat bladed spokes it oozes muscles. And that muscle is needed when zipping around cars and corners at full pace. Its simplicity comes from Swiss engineering know-how, ensuring a long, trouble free life navigating city roads and procuring big grins on riders faces. That said, it doesn't mean it can't go fast on an oval, because it can.
$552.00 - $708.00
Responding to the demand from top racers for even wider rims, DT has developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
$552.00 - $763.00
The pinnacle of aluminium road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness-to-weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. Finally, at just 1435g, this wheelset is both extremely practical and competitive, very much in tune with its stealthy appearance.
There's something incredibly pure about trail riding—the feeling of exploration and the satisfaction of cleaning a technical section are hard to beat. It’s just you versus the terrain, so you need gear that won’t let you down. XA wheels give you the confidence and control to enjoy the ride. They are built with an asymmetric, sleeved rim that’s wide (30mm internal), lightweight, and strong. They also feature our UST Tubeless Ready technology, which makes it easy to enjoy the benefits of tubeless tires, including better control and traction along with a reduced risk of punctures. Straight pull spokes save weight without sacrificing strength or durability. The hubs are fine-tuned with our new ID 360 freehub, which is compatible with all axle sizes as well as XD drivetrains. The wheels are compatible with most modern standards, such as 15x100/12x142 and can easily be converted to other options (9x100 front, 9/12x135 rear) with optional adapters. Added confidence and control on the trail - Wider rim allows more air volume in the tire for better comfort. - Straight-pull spokes reduce weight while ensuring optimal stiffness and reliability. Better comfort and traction, plus a reduced risk of punctures - UST Tubeless Ready design makes it easy to experience the benefits of riding without tubes. - Wheelset comes with UST tubeless valves and rim strips. Accessible entry point to Mavic technologies - Straight-pull spokes - New ID 360 freehub and lightweight sleeved rim design
$328.00 - $434.00
What feels better than passing a mountain biker on the trail while gripping the hoods of your cross bike? Not much, but the CR 1600 SPLINE offers more than that. Whether you are cutting through mud, dancing on icy, frozen trails, or exploring dusty desert roads, you will feel the great efficiency of these wheels. Wide straight-pull spokes attached to a beautifully machined, high end Ratchet System hub will keep encouraging you to attack new challenges as soon as the last one is over, and the CR 1600 SPLINE is totally up to it.
$387.00 - $546.00
For riders looking for more — more grip, more capability — the M 1700 SPLINE 35 is the right choice. Wearing some plus size tires, this wheelset will carry you far into all mountain terrain. Offering an almost unbeatable ratio of affordability, high-end components, and build, it is the workingman's wheel. Its simple and durable straight-pull construction with DT's high precision Ratchet System hubs make it so reliable and easy to use, that all that's left for you is to focus on the ride and think about the next adventure.
$1,092.00 - $1,514.00
Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.
Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know how and passion, it is light and reliable but loves to smash into the rough like no other.
The Podium SRD earned major wins at the B.C. Bike Race and U.S. Marathon National Championships while it was still only in development and stands out as Stan's fastest and lightest racing wheel. Stan's patented BST rim shape has been taken even further by decreasing sidewall height and updating Stan's carbon layup process to shave even more weight where it matters most. Though the 300g Podium SRD rim is Stan's lightest carbon rim, it's every bit as strong as Stan's acclaimed Valor and 15% stiffer laterally, thanks in big part to the evolution of Stan's impact absorbing technology. The new RiACT rim shape and lay up is able to deflect 11% more than the Valor, which translates into fewer pinch flats, added durability, and less rolling resistance. The Podium SRD is laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. Combined with Stan's Neo Ultimate hub with updated Speedsync bearing and axle design and near instantaneous engagement, the Podium SRD is purpose built for racing, and ready to live up to its name. Podium SRD wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Speed and durability: deflects impacts and defies tire pinch flats - Race bred with wins at the B.C. Bike Race and U.S. Marathon National Championships - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires - Register your wheels for 5-year warranty and lifetime crash replacement
The name Crossmax has a long history in the world of XC riding and racing. This Tubeless Ready wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless-ready tires and gives you all the associated benefits, including better traction and control, a smoother ride quality, and a reduced risk of punctures. The rim design features a 25mm internal width with a hookless profile, a sensible setup for tubeless XC tires. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Efficient, strong, and reliable XC performance - New, wider (25mm internal), sleeved rim design is lighter without compromising strength. - 24 straight-pull spokes ensure optimum stiffness and reliability. Smoother ride, increased traction, and a reduced risk of punctures - UST design and tubeless rim tape make it easy to set up tubeless-ready tires. Trickle-down technology from high-end Mavic XC wheels - Reliable ID 360 freehub system and lightweight rim design.
When heavy duty cyclocross riding is your passion, the C 1800 is the right partner for any mission. With its high-end sleeved rim ready to take up MTB-sized rubber and the tough build featuring DT's sturdiest bladed spokes, it is right at home in anything from jumping obstacles to cutting through the mud to sprinting up steeps. Trademark DT Swiss reliability coming from the precision hubs and the superb wheel building quality guarantee trouble free rides year-in and year-out.
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Formula TH-50 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 35mm - Rim Model Evo E-Tour 19
Page 1 of 1