Chainrings

• Replacement for one-piece crank • Steel

- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear

- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)

These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible

Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD

The Sequence chainring uses the official X-SYNC technology licensed from SRAM for unmatched chain retention. Chromag is the only MTB company officially authorized to produce chainrings with the X-SYNC technology. So now, no matter what kind of mountain bike you have, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. SPECS - Official SRAM X-SYNC technology. Complies with SRAM warranty standards for compatibility with all SRAM X-SYNC drivetrain. - Chamfered mud-clearing recesses at the base of the teeth provide the best possible performance in muddy conditions. - CNC Machined from 7075T6 aluminum for the best durability. - Available for 104/94 BCD crank spider patterns and Direct Mount options. - 7075-T6 aluminum - Anodized Black with laser etch - CNC machined in Whistler, BC. Sequence rings are available in: - 30/32/34/36 tooth (104 BCD) - 28/30 tooth (94 BCD) - 28/30/32 tooth (Direct Mount RFC) - 28/30/32 tooth (Direct Mount GXP) - 28/30 tooth (Direct Mount BB30) - 28/30/32 tooth (Direct Mount Boost) Compatibility Notes: - 104 BCD is the most popular crank arm spacing design (refer to manufacturers specifications to check for compatibility). - Direct mount rings work with SRAM S1400, S2200, S2210, X9 XO and XX1 crank arms. - Direct Mount Sequence rings are available for with GXP and BB30 bottom brackets as well as Race Face Cinch cranks.

416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

This aluminum bash guard is compatible with Surly's MWOD cranksets. Keep rocks and roots away from your chainring teeth and ride on.

Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.

Surly's MWOD chainrings convert your Mr. Whirly crankset into an offset mountain double crank. In simple terms, they allow your fat bike to run an extra wide rear tire and rim combo (for example, 4.7-inch tires on 100mm rims or 82mm rims on your Pugsley) while avoiding chain-on-tire rub. This outer chainring bolts directly to the inner ring with four chainring bolts.

An issue many people ran into when they began using 1x setups was chain retention with the front chainring. In the beginning of the 1x movement, many companies dealt with this by using aftermarket chain keepers that somehow bolted to the frame. Many people discovered that using a narrow-wide chainring in conjunction with some type of 'clutch' rear derailleur helped abate or eliminate these chain-jumping issues. Narrow-wide rings use alternating tooth profiles that more positively engage the chain and help control a deflecting chain in bumpy conditions. Your friends at Surly have partnered with SRAM to bring you stainless steel X-Sync chainrings. Stainless Steel is durable. This durability is pretty useful when you're talking about the one ring that is bearing the brunt of all your miles.

The new chainrings are stainless steel and have improved ramps, gates, and pins for better shifting performance.

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

- For chain and derailleur alignment - 20 per bag

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface

120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! - These rings fit any 120 BCD crankset or spider - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy

The XTR M960, now 4 generations old in the XTR lineage, is an oldie-but-goodie crankset and Wolf Tooth aims to meet your 1x needs with these rings. Compatibility: - These rings only fit on the M960 crankset in the middle ring position. They are a 102mm BCD. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention)

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).